User`s guide

- 38 -

• Connection procedure

- make the connections according to the diagram below :

IMPRIMANTE

MX2000

CR2000

ORDINATEUR PC

Cordon liaison PC/CR2000

(1)

Cordon liaison PC / IMPRIMANTE

- place the MX2000 in the CR2000 charger, which is already switched on (steady

green light on)

- check that the LED of the charger goes red, either steady or blinking.

- prepare the PC, using the COM2000.

- switch on the printer, and put it to the “on line” position.

- check the display of the MX2000 shows a discontinuous line indicating that the

MX2000 has been on charge for less than 10 minutes.

Reminder: you can connect a PC or a printer to the MX2000 only during the first 10

minutes (discontinuous line)

Using the COM2000 program, in the historical maintenance menu, choose the

mode, and start printing.

(for further details, look up the COM2000 section).

printing

COMPUTER

PRINTER

COMPUTER/PC