User`s guide

- 28 -
if yes : validate by pressing key
again bringing up
It is now possible to go to another menu.
If the signal has not yet stabilised (lamps still on), and you still
validate the “yes” (using key )
the display then shows and you return automatically
to the preceding state to re-adjust the sensitivity.
if no : validate by pressing key
again bringing up , and you can now repeat the
calibration or enter another menu.
Note : When the cell change has been completed, if you want to enter another menu
(on the way), then press key
THE SELF-ADJ MENU
This is for automatic zero adjustment for all of the cells present in the MX 2000, even
including the switched-off channels (OFF).
a / when removed from the charger
When the MX2000 is removed from the charger after a charging time of more than
15 minutes, all lamps come on momentarily, together with a short audio signal, and
the display then shows
then
alternating with several times
then finally
followed by normal cyclical display of the four channels.
MX 2000
SELF ADJ
TEST
DONE
chg cell
bad adj
chg cell