Full Product Manual
6
Barbecue Islands
LTR50001036, Rev. D
www.calamebbq.com
Installation After Delivery
For more information on installing your grill and accessories, see the
grill owner’s manual.
Connection to Services
After your barbecue island is delivered, set in place, and the grill is
mounted, you will need to connect all of the services to your hardware.
If your dealer is not a certied contractor, you will need to hire a
contractor for this.
The natural gas line connects to the grill inside the island. As you are
facing the grill, the connection is located at the right rear side of the grill.
The stub-up will terminate with a valve and a ½” male tting. Connect
the exible tubing from the grill to the male tting.
Both the natural gas and the electrical service connect inside where
the grill outlet is located.
The voltage transformer can be mounted to any part of the frame where
it will not be in the way. Plug it into the 110V grounded outlet located
inside the barbecue island.
Side burners do not require a separate regulator. You can put in a tee
in the line after it comes out of the regulator. For detailed installation
instructions, see the grill and cart owner’s manual.
If you have a GPV3100, the sections will need to be connected before
you connect it to services. See the following instructions “Joining the
GPV3100 Sections”.
If you have a LBK870, see the following instructions “Arranging the
LBK870 Sections”.
LED Light Switch
The switch for the LED lights is located in a covered utility box on the
side of the barbecue island. Flip it up to turn all the lights on.