Pre-Delivery/Install Checklist
8
Barbecue Island Pre-Delivery Guide
LTR50001041, Rev. G
www.calamebbq.com
For more information on installing your grill and
accessories, see the grill and carts owner’s manual.
If your barbecue island has two or more pieces, you
or your contractor will mate pieces and bolt them
together. When sections are aligned and in place,
apply grout and do whatever else is necessary
cosmetically to ensure the barbecue island is attractive
and presentable.
After your barbecue island is delivered, set in place,
and the grill is mounted, you will need to connect all of
the services to your hardware. If your dealer is not a
certied contractor, you will need to hire a contractor
for this.
The natural gas line connects to the grill inside the
island. As you are facing the grill, the connection is
located at the right rear side of the grill. The stub-
up will terminate with a valve and a ½” male tting.
Connect the exible tubing from the grill to the male
tting.
Both the natural gas and the electrical service connect
inside where the grill outlet is located.
The voltage transformer can be mounted to any part
of the frame where it will not be in the way. Plug it into
the 110V grounded outlet located inside the barbecue
island.
Side burners do not require a separate regulator. You
can put in a tee in the line after it comes out of the
regulator. For detailed installation instructions, see the
grill and cart owner’s manual.
Installation After Delivery