Specifications

24
Appendix
Power Burner
LTR50001100, Rev. B
www. c a l  a me bb q. co m
Problem: Plugged orifi ce
Solution: Unplug the ori ce as follows:
Remove grate and grease tray.•
Remove the burner ring and the outer burner.•
Carefully lift the center burner up and away from •
the gas ori ce.
Remove the ori ce from the control valve.•
Gently clear any obstruction with a  ne wire.•
Reinstall the ori ce, reinstall the burners over the •
ori ces, and place the burner peg into position hole
at the bottom ledge of the  rebox.
Replace cooking components and grease tray.•
If an obstruction is suspected in the control valve, con-
tact your local Cal Flame dealer for assistance.
Problem: Burner tube is misaligned over the orifi ce
Solution: Reposition the burner tube so that it is properly seated
over the ori ce.
Problem: Obstruction in the gas line
Solution: Remove the fuel line from Power Burner. (Do not smoke
or perform any maintenance in the vicinity of an open
fl ame.) Open the gas valve for one second to blow out
any debris. Close off the gas valve and reconnect the
fuel line securely.
Problem: Yellow Flame
Solution: Some yellow at the tips may be present due to impuri-
ties in the fuel. If the fl ame is golden or yellow in color,
the reason could be seasoning salts, oil  lm, or other
foreign matter on the burner.
You may also need to adjust the venturis. If you are
using propane, they should be completely open. If you
are using NG, they should be open 1/4 to 1/2 way. (See
page 16 to see location of the venturis.)