Use and Care Manual
24
Cleaning and Maintenance
Fire Pit Owner’s Manual
LTR50001010, Rev. M
Inspect the appliance before initial use. Clean the appliance at least
annually and have it inspected by a qualied eld service person.
Periodically remove the logs and examine the burner. If the burner is
dirty, clean it with a soft wire brush. Also examine the area around
the burner air shutter. Remove any dirt or debris in this area. This will
ensure long life and trouble-free operation.
Periodically check the hose connecting the propane gas cylinder to
ensure it is not damaged in any way.
Carbon (soot) may build up on the surfaces of the logs with heavy use.
This is more likely to occur with propane gas. Clean soot off the surface
of the logs periodically to prevent excessive buildup.
To clean the logs, be sure the re is out, the gas supply is turned off
and the logs are cool to the touch. The soot can then be brushed of
with a dry bristle brush or cloth. Take care while cleaning the logs as
they can become damaged if mishandled.
Periodically check the hose connecting the propane gas cylinder to en-
sure it is not cracked or damaged in any way. All natural gas hook-ups
should be serviced and inspected only by qualied installers only.
The easiest way to clean the repit or replace is to let the repit/
replace cool completely off.
• With a wood burning replace, remove the steel grate and sweep
out the ashes and leftover kindling.
• With a gas repit or replace, spray the enclosure off with water.
Note: Do NOT spray water directly onto the burner and pilot light
of the gas replace.
Cleaning and Maintenance