Use and Care Manual
20
Installation / Assembly
Fire Pit Owner’s Manual
LTR50001010, Rev. M
5. Refer to the image below for proper placement of parts. The wash-
er should insert next to the protective screen cover, then the spring
is to be aligned with the hole and nally the natural gas orice is to
be threaded into the end of the fuel inlet leading into the burner.
Once tight the other brass tting connection can be made from the
fuel line tted between the valve and the orice.
6. Connect natural gas supply hose (not included with kit) from sup-
ply source. Test for leaks.
7. Once the conversion is completed and leak tested, reload the re-
place or repit with the lava rocks and re logs. Test the unit while
in place and verify it works properly. If ame from burner is not
properly adjusted you can adjust air intake by turning the protec-
tive screen cover and air intake sleeve on the fuel supply tube.
Assembled Components