Use and Care Manual
Installation / Assembly
15
Fire Pit Owner’s Manual
LTR50001010, Rev. M
Fire Pit Burner Installation
The log set and crushed lava rock are shipped together on applicable
models. Remove the log set and unpack all components. The logs are
fragile -- use care when handling.
Turn the re pit on its side. Connect the piezoelectric starter and attach
the ex hose (in black in the photo below) for the gas supply.
Place the re pit back down on its pedestal. Attach the gas ex hose to
the burner. (The gas ex hose is black as depicted below.)
Note: If you want to convert the orice from propane to NG, refer to
page 18 for gas conversion instructions.
Piezoelectric
Starter Wire
Ground Wire