LTR20061023, Rev.
CONTACT INFORMATION For customer service, please contact your authorized dealer immediately. If you need additional information and/or assistance, please contact: C.A.I. Customer Service Department 1462 East Ninth Street Pomona, CA 91766 Toll Free: 1-800-CAL-SPAS Fax: 1-909-629-3890 www.calspas.com Copyright 2004, 2005, 2006 California Acrylic Industries, Inc. All rights reserved. Duplication without written consent is strictly prohibited. Cal Spas™ is a registered trademark.
Table of Contents Cal Spas Clear Water Plan Alternative Sanitation Options ................................................................... 1 Before You Begin ...................................................................................... 1 Chemical Overview Chemical Safety ........................................................................................ 3 Chemical Descriptions...............................................................................
Cal Spas Clear Water Plan Cal Spas Clear Water Plan Great spa water is easily achieved when the right chemicals and / or systems are used and the Cal Spas “Clear Water Plan” is implemented. The key to clean, clear, and safe water is to fully understand how spa water reacts to users, system operation and chemical use. The “Clear Water Plan” will help give you that understanding.
Cal Spas Clear Water Plan Filtration The filter is the part of your spa that removes the debris from the water. Even though Cal Spas uses the advanced Bio Clean filter cartridge that protects itself from bacterial growth, the filter still needs to be cleaned on a regular basis to maximize your spa’s filtering performance and heating efficiency.
Chemical Overview Chemical Overview The following information is intended for use with Cal Spas chemicals only. Other brands of chemicals may have similar names and/or usage descriptions but due to manufacturing differences, use of other chemicals can increase the likelihood of under or over-dosing the spa chemicals. Damage to the spa or spa’s components from improper chemicals or chemical usage is not covered under the spa’s warranty.
Chemical Overview Chemical Descriptions The following descriptions and recommendations are intended for use with Cal Spas chemicals only. Many of these chemicals will be used with alternative sanitation systems as well. Test Strips -- Bromine Provides accurate spa water testing for Bromine, pH, and total Alkalinity. For use with bromine “Clear Water Plan” Test Strips -- Sodium Bromide Provides accurate spa water testing for Sodium Bromide.
Chemical Overview Oxidizer Shock Destroys ammonia, organic contaminants, and odor causing wastes in spa water. Use with any “Clear Water Plan”. Metal Protector Helps prevent metals in water from staining spa. Use during start up. Use with any “Clear Water Plan” Stain And Scale Defense Helps prevent minerals from damaging spa components. Use with any “Clear Water Plan” Ph / Alkalinity Up Raises pH and alkalinity levels in spa water.
Chemical Overview Spa Brite Helps to quickly clear up cloudy spa water. Use with any “Clear Water Plan”. Foam Gone Quickly breaks up existing foam on spa water. Use with any “Clear Water Plan” Fast Sheen Water based, reactive, silicone polish that seals, shines, and protects spa acrylic surfaces. Use with any “Clear Water Plan”. Filter Cartridge Cleaner Deep cleans filter cartridge. Dissolves scale and removes imbedded organic contaminants from filter cartridge fibers.
Chemical Overview Vinyl And Leather Cleaner Specifically designed to clean and protect spa covers and pillows from chemical and ultraviolet damage. Use with any “Clear Water Plan”. Cal Balance Magnetic Water Stabilizer Promotes clean water naturally by organizing water molecules into appositive charge. Helps coagulate debris for improved filtration, and also traps calcium and scale into a suspension that gives spa water a soft, silky feel. Use with any “Clear Water Plan”.
Traditional Chemical Start Up Traditional Chemical Start Up Prior to filling a spa for the first time, or after a routine draining, you will want to follow this start-up plan to extend water life and performance. If you are following either the Bromine or Chlorine “Clear Water Plans”, you will notice that both start-up processes are the same with the exception of Step 7. As with all chemical dosages listed in these “Clear Water Plans”, start-up dosages are intended for 500-gallon spas.
Traditional Chemical Start Up Bromine Clear Water Plan This plan and its chemical dosages are intended for Cal Spas chemicals only. Most chemical manufacturers use different chemical formulas and strengths. Only Cal spas chemicals are specially formulated to provide chemical balance at lower dosages. Always read and follow printed instructions on chemical bottles and packages. Day One (Monday) 1. 2. Test spa water using “Bromine Test Strips”.
Traditional Chemical Start Up Chlorine Clear Water Plan This plan and its chemical dosages are intended for Cal Spas chemicals only. Most chemical manufacturers use different chemical formulas and strengths. Only Cal spas chemicals are specially formulated to provide chemical balance at lower dosages. Always read and follow printed instructions on chemical bottles and packages. Day One (Monday) 5. 6. Test spa water using “Chlorine Test Strips”.
Traditional Chemical Start Up Cal Zone Quest 2000 Ozonator Clear Water Plan This plan and its chemical dosages are intended for spas equipped with the optional Cal Zone Quest 2000 Ozonator (portable spas only) or Del Zone Eclipse (in-ground models only). The chemical references are designed for Cal Spas chemicals only. Start Up 1. 2. 3. Follow the Spa Start Up procedures for Chlorine “Clear Water Plan”. Set the spa’s filtration time for “F-4”. This activates the ozonator and produces the ozone gas.
Traditional Chemical Start Up Cal Clarity Automatic Bromine Generator Clear Water Plan This plan and its chemical dosages are intended for spas equipped with the optional Cal Clarity Automatic Bromine Generator. The chemical references are designed for Cal Spas chemicals only. Note: Following these instructions is very important to ensure proper operation of your Cal Clarity Automatic Bromine Generator. Start Up 5. 6. 7. 8. Clean surface of spa with Cal Spas “Multi-Purpose Cleaner”.
Traditional Chemical Start Up 16. 17. 18. 19. 20. 21. Use Sodium Bromide Test Strips (not bromine) and adjust sodium bromide level to 7.4 to 8.2 (equates to 1700 to 2500 ppm TDS / conductivity level). Add 2 oz. of Cal Spas “Oxidizer Shock” to help burn out impurities in fill water. Turn the dial on the bromine generator clockwise until the LED display reads 10. This will initiate the build up of a bromine bank. Set the filtration cycle to “continuous” (F-C) for the first 24 hours.
Traditional Chemical Start Up Cal Inline Sanitation System Clear Water Plan This plan and its chemical dosages are intended for spas equipped with the optional Cal Inline Sanitation System. The chemical references are designed for Cal Spas chemicals only. Note: Following these instructions is very important to ensure proper operation of your Cal Inline Sanitation System. Start Up -- First Day 1. 2. 3. 4. Clean surface of spa with Cal Spas “Multi-Purpose Cleaner”.
Traditional Chemical Start Up 7. 8. 9. 10. 11. Snap the Bromine Cartridge into the bottom portion of the holder and the Mineral Cartridge into the top portion of the holder. (make sure the cartridges go into the correct position as over-bromination will occur if they are switched). Line up the arrow on the top of the cartridge holder with the arrow on the top of the system. Lower the holder containing the cartridges down into the system until the tabs on the holder line up with the tabs on the system.
Traditional Chemical Start Up Maintenance Regardless of which “Clear Water Plan” you are using, you should also do the following: Every Month 1. 2. 3. 4. Deep clean your spa’s filter. (Follow “filter cleaning” instruction at beginning of “Clear Water Plan”) Check inside the equipment area for leaks, rodents, and insects. If a leak is discovered, contact your Cal Spas dealer for service.
Please make a record of the following. It will be valuable if service is required. Cal Spa Model: Cal Spa Serial Number: Date Purchased: Date Installed: Cal Spa Dealer’s Phone Number: Cal Spa Dealer’s Address: C.A.I. Customer Service Department 1462 East Ninth Street Pomona, CA 91766 Toll Free: 1-800-CAL-SPAS Fax: 1-909-629-3890 www.calspas.
