Preface introduction Bluetooth technology is a new generation wireless communication system, which consumes low prows and transmits data among different products within a short distance; thus, Bluetooth wireless communication device will connect various digital devices without any wired transmission circuit Your Bluetooth headset can communicate with other Bluetooth devices within 10 meters (33 feet) .
Charging BEET After headset is fully charged, the indicator light will be off ; at this time you can introduction remove the charger from the outlet and remove charger from headset. Before your first ime using Bluetooth headset, please charge for 24 hours to Note : Only by certified service engineer can the battery be dismantled or replaced. If the headset make sure that your headset is fully charged. Afterward, if you hear five short Is under appropriate use, the battery will work for a Lang time.
Turning the Headset Tum on both your headset and phone. Turning on the Headset 2. Press volumes-up or volume-down button for 2 seconds until the indicator light lights up. This means that both devices enter pairing mode. Simultaneously press both the multi-function button ( MFB } and volume up / down button for more than 2 seconds; then the indicator light on Toothbrush headset will 3. Elect " Helios " from the phone screen to pair headset and phone. light up.
