User's Manual

6
Before using your phone Before using your phone
7
Before using your phone
Handset description
Battery usage
Battery installation
1. Remove the battery cover from the
unit.
2. Slide the battery into the slot
located at the bottom of the unit and
press until you hear the “Click”.
Battery removal
1. To remove the battery, push down
on the top of the battery while
inserting your finger into the slot
and pulling up from the back of the
battery and slide it out.
2. Align the cover tabs with the slots at
the top of the device and slide the
battery cover back onto the unit.
note If the battery is not correctly placed
in the compartment, the handset
will not turn on and/or the battery may
detach during use.
Battery charging
Power connection
1. Plug the AC Charger into a standard
outlet.
2. Plug the other end of the AC
Charger into the charging port on
your phone. The battery must be
installed onto the phone to work
properly.
hot key
• When you charge the battery with
the phone power o, you will see a
charging status screen. You cannot
operate the phone until it is
powered on.
1. Earpiece
2. OK key
3. Menu key
4. Speakerphone key
5. Send key
6. Navigation key
7. Contacts menu
8. Schedule key
9. End key
10. Numeric keypad
11. Microphone
12. Camera lens
13. Speaker
14. Headset port
15. Side volume keys
16. Charger port
17. Camera key
12
13
3
1
4
5
7
8
9
11
10
2 6
14
15
16
17