User's Manual

automatically after the pause. This
feature is useful for dialing systems
that require a code.
1. To insert a wait/pause, enter a
phone number then press the Right
Soft Key Options. Select either a
Type ‘P’ (“P” appears) or a Type ‘T’
(“T” appears).
note
• Type “P”: A hard pause stops the
calling sequence until further input
from you.
• Type “T”: A two second pause stops
the calling sequence for two seconds
and then automatically sends the
remaining digits.
2. Press the SEND Key to dial or Left
Soft Key Save to save the number.
3-way calling
With 3-Way Calling, you can talk to
two people at the same time.
1. Enter a number you wish to call then
press the SEND Key.
2. Once you have established the
connection, enter the second
number you wish to call then press
the SEND Key.
3. When you’re connected to the
second party, press the SEND Key
again to begin your 3-Way call.
note 3-way calling is a system
dependent feature. Please contact
your service provider for details.
Caller ID function
Identifies caller by displaying their
phone number. If the caller’s name
and number are already stored in your
phone book, their name will appear.
This is a system dependent feature.
Please contact your service provider
for details.
Call waiting function
Notifies you of an incoming call when
you are already on a call by sounding
a beep tone and displaying the caller’s
phone number.
1. To answer another call while on
the phone, press the SEND Key.
12
Basic operation
This places the first call on hold.
To switch back to the first caller,
press the SEND Key again.
note Call Waiting is a system
dependent feature. Please contact
your service provider for details.
Adjusting volume
1. During a call, press Side Volume Key
up or down to adjust the earpiece
volume.
Making a call through the contact
list
One-touch/two-touch dialing
Ideal for frequently dialed numbers,
this feature allows entries in your
contact list to be dialed via the
keypad with only one or two key
presses. In order for One-Touch/
Two-Touch Dialing to properly work, it
must be enabled.
One-touch dialing
2-9: Press and hold the corresponding
memory number for more than 1
second.
Two-touch dialing
10-99: Press and the first digit and
second digits of the memory number
short and long respectively.
note
• If no phone number is stored in
the location entered, “Speed dial is
empty” will appear on the screen.
• If One Touch Dial is set to O: Enter
the speed dial location number then
press the SEND Key.
• Location 1 is reserved for voicemail.
Location 2-99 are unassigned. To
assign a speed dial location, please
see page 21.
During a call
1. Press the Left Soft Key Mute.
• Mute (Unmute) : If you press Mute
during a call, the person you are
speaking with cannot hear you or
any sounds from your side of the
conversation. However, you can
still hear them.
Basic operation
13