User's Manual

1. Press the Left Soft Key Menu > Tools
> Memo Pad.
2. The Memo pad list of memos is
displayed in the order they were
saved. To add a new memo, press
the Left Soft Key Add.
• Highlight a memo and press the
Right Soft Key Options. (Erase,
Erase All)
3. To view a memo, highlight it and
press the OK Key. Press the Right
Soft Key Erase to erase the memo
or press the Left Soft Key Edit to
edit the text, then press the Left Soft
Key Save to save the changes.
Calculator
To access the calculator:
1. Press the Left Soft Key Menu > Tools
> Calculator.
2. To reset, press the Clear Key or
press the Right Soft Key Clear.
Tip calculator
To access the Tip calculator:
1. Press the Left Soft Key Menu > Tools
> Tip Calculator.
2. Enter the amount of your “Bill”.
• Press the Left Soft Key Point(.) to
enter a decimal point.
3. Enter the percentage “Rate”.
4. Enter the “# of people”. Press the
OK Key to calculate the result.
• Press the Right Soft Key Erase.
Stop watch
To access the Stop watch:
1. Press the Left Soft Key Menu > Tools
> Stop Watch.
2. Press the Left Soft Key Start to start
the stopwatch.
3. Press the Left Soft Key Lap to save
Lap time and start counting another.
Up to 20 laps can be saved.
4. Press the Right Soft Key Stop to
stop the stopwatch.
5. Press the Right Soft Key Reset to
reset the stopwatch.
28
Tools
Unit converter
To access the Unit converter:
1. Press the Left Soft Key Menu > Tools
> Unit Converter.
2. Select the desired type of
measurement, and then press the
Down Key. (Length, Weight, Volume,
Area, Temperature, Speed)
Voice service
Voice command
To use Voice Command:
1. Press the Left Soft Key Menu > Voice
Service > Voice Command.
• Call <Name or #> : Use the
Call command to voice dial a
name from your Contact list or
a phone number. When dialing
a number, pronounce each digit,
but do not pause noticeably
between the digits.
• Lookup <Name> : Use the Lookup
command to retrieve and display
information for any name stored
in your Contact list.
• Check <Item> : The Check
command lets you check status
information for your phone. You
can say “Check” or “Check Status”
to see and hear all status
information.
• Press the Left Soft Key Tutorial.
Voice Commands menu
information appears. To return to
the previous page, press the Left
Soft Key Skip.
• Press the Right Soft Key Settings.
(Confirmation, Adaptation, Audio
Modes, About)
note
• Voice Commands – To use the
voice command, press and hold the
Speaker Key for 3 seconds. To exit
Voice Command, press END Key.
• Speaker Phone – To use the
speaker phone, press and release
the Speaker Key. The Speaker
phone icon is displayed in indicator
area. To exit speaker mode, press
and release the Speaker Key.
Tools / Voice service
29