User's Manual

Voice service
Voice command
To use Voice Command:
1. Press the OK Key Menu > Voice
Service > Voice Command.
• CALL <NAME OR #> : Use the Call
command to voice dial a name
from your Phonebook list or a
phone number. When dialing a
number, pronounce each digit,
but do not pause noticeably be-
tween the digits.
• LOOKUP <NAME> : Use the
Lookup command to retrieve and
display information for any name
stored in your Phonebook Entry
list.
• CHECK <ITEM> : The Check com-
mand lets you check status infor-
mation for your phone. You can
say “Check“ or “Check Status“ to
see and hear all status informa-
tion.
• Press the Left Soft Key Tutorial.
Voice Commands menu informa-
tion appears. To return to the
previous page, press the Left Soft
Key Skip.
• Press the Right Soft Key Settings.
(Confirmation, Adaptation, Audio
Modes, About)
V.Cmd settings
1. Press the OK Key Menu > Voice
Service > V.Cmd settings.
• Confirmation : You can control when
the system asks you to confirm a
name or number. You can adapt
the system to your voice for optimal
recognition accuracy. During adap-
tation, the system will prompt you
to speak a series of short phrases. If
you need to erase adaptation data
and set the system back to the fac-
tory default, select Reset Voice.
• Adaptation : You can adapt the sys-
tem to your voice for optimal recog-
nition accuracy. During adaptation,
the system will prompt you to speak
28
Voice service