User manual

62
 Unit ID
The Unit Name to be included in the NMEA message payload.
 Source Identification
The Unit's IP address that will be included in the NMEA message payload
Triggers – Device
 Cell Temperature and thresholds
Enable or disable NMEA alarm and notification when temperature goes out of range.
Triggers – Analog Input
 Analog Input and thresholds (1 or 2)
Enable or disable NMEA alarm and notification when an analog input goes out of range.
Triggers – Digital Input
 Digital Input 1, Digital Input 2
Enable or disable NMEA alarm and notification when the input state changes.
3.10.3 LABELS
Each diagnostic value can be user-defined messages indicating its normal and abnormal conditions.