User manual

44
Figure 28: Vanguard Router – Static Routes
Static Routes
 Route Name
Sets the alphanumeric identifier of the static route in the Static Route Table
 Destination IP Address
Sets the IP address of the destination network
 IP Subnet Mask
Sets the subnet mask of the destination network
 Gateway
Sets ppp (this router's wireless internet connection), pptp (VPN), GRE Tunnel, or the local network IP address for
the gateway to the destination network
 Gateway IP Address
This is only used if local IP addr was selected for gateway. Enter the address of the local gateway
 Metric
Enter a number from 1 to 20. The lower the metric value the higher the route priority.
The ADD button must be pressed to add the configured route to the Static Route Table.
3.7 VPN
From the main navigation panel, select VPN for access to PPTP, IPsec and GRE screens.