User manual

42
Figure 27: Vanguard Router – Port Forwarding
DMZ Support
DMZ is a host on the internal network that has all ports exposed, except those ports forwarded otherwise.
 DMZ
Radio button selection to Enable/Disable; Select Enable to allow the modem to use DMZ routes using the address
set in the Destination IP Address. Select Disable to shut down the DMZ functionality.
 Friendly IP Address
Optionally restricts DMZ access to only the specified IP address. If set to "0.0.0.0", the DMZ is open to all incoming
IP Addresses.
 Destination IP Address
The IP address which has all ports exposed, except ports defined in the Port Forwarding configuration.
The SAVE button must be pressed for changes to take effect.
Port Forwarding Support