User manual

30
 MN-HA SPI
This parameter should be set to the MN-HA SPI setting supplied by the provider. This is a numeric setting.
 HA Secret
This parameter should be set to the Home Agent Secret (password) supplied by the provider.
 AAA Secret
This parameter should be set to the AAA Shared Secret (password) supplied by the provider.
 Rev Tunnel
Reverse Tunneling may be enabled or disabled, as specified by the provider.
 Program
Pressing the program button will prompt you to confirm you wish to program the current displayed settings. If
confirmed, the settings will be programmed and the unit will reboot.
Profile Selection
 Active Profile
Displays which profile is active. The field cannot be modified, instead press the Change button to select the other
profile.
 Switch Profile
Pressing the Switch Profile button will prompt you to confirm you wish to switch to activate the other profile. If
confirmed, the other profile will be selected and the unit will reboot.
3.4 CELL CONNECTION
Select Cell Connection from the main navigation pane for user access to the Dial Settings, System Monitor and Dynamic
DNS configuration screens.
3.4.1 DIAL SETTINGS
The Dial Settings screen configures the dialing properties to initiate a data call with the cellular provider.