Reference Guide

996 Surround Mixing (Producer and Studio only)
Surround effects
To disable an instance
• On the SurroundBridge tab of the effect’s property page, uncheck the Enable check box of the
plug-in you want to disable. The instance’s tab becomes grayed-out when you do this. You can re-
enable the instance by rechecking the check box.
The Enable check box is a separate bypass system from the Bypass button that is on the instance’s
individual property tab. Disabling an instance by using the Enable check box lightens the CPU load
by taking the instance out of the processing path. The Bypass button on the instance’s property tab
does not change color when you click the Enable check box, because it is a separate system. The
Bypass button is automatable in some plug-ins.
To save a preset
1. Set the effect’s parameters the way you want them.
2. In the Presets field of the effect’s property page, type a name for the preset, and click the floppy
disk icon that’s just right of the Presets field.
Saving a preset of an effect that’s patched into a surround bus creates a surround preset, which
includes channel assignments and parameter linkage settings.