Reference Guide

927

External Insert plug-in

Mixing

Delay Measurement. This control shows the last measured round-trip delay through your audio

hardware. Click the control to initiate a new measurement.

Manual Delay Offset. The center control displays and resets the manual delay offset. The buttons

to the left decrease the manual offset by 1 or 10 samples. The buttons to the right increase

the manual offset by 1 or 10 samples. All delay buttons are disabled during playback.

Figure 283. External Insert

A. Send Stereo Mode (Left, Right, Mono) B. Send Level C. Send VU Meter D. Send Port E. Return

Phase F. Return Level G. Return VU Meter H. Return Port I. Delay Measurement J. Send section K. Return

section

Note 1: Time-based effects such as reverb and delay can artificially increase the latency

measurement. Before manually measuring the delay, you may want to bypass the external gear

(if Bypass is supported by your external gear).

Note 2: The delay is automatically re-measured if the Buffer Size setting is changed in Edit >

Preferences > Audio - Driver Settings or if ports are changed.

J KI