Reference Guide

905
Metering
Mixing
To adjust the meter performance, go to Edit > Preferences > Customization - Audio Meters and
follow these guidelines:
Here are the default values for the various settings:
• Refresh Rate = 40 msec
• Peak Hold – Decay Rate = 50 msec
• Peak Hold – Hold Time = 750 msec
• RMS Rise = 300 msec
• RMS Fall = 300 msec
• Peak Rise = 0 msec
• Peak Fall = 1000 msec
See also:
“Customization - Audio Meter (Advanced)” on page 1865
To do this Do this
Increase or decrease meter refresh rates Adjust the Refresh rate field. Valid values are from 25 to 250
milliseconds.
Change the decay rate (the amount of time
the meter display stays at its peak)
Adjust the Decay Rate value. Valid values are from 1 to 150
milliseconds.
Increase or decrease the amount of time
the meter displays a peak value
Adjust the Hold Time value. Valid values are from 0 to 5000
milliseconds.
Adjust rise and fall times Adjust the Rise or Fall settings for RMS or Peak. Valid Rise
values are from 0 to 1000 milliseconds. Valid Fall values are from
0 to 2500 milliseconds.
Table 167.