Reference Guide

884 Mixing
Preparing to mix
To hide a bus or track
• Right-click on the module and choose Hide Track or Hide Bus.
To show or hide meters in the Track view
• Click the Track view Options menu, point to Meter Options and select one of the following
options:
• Track Record Meters. Displays record meters for any armed track.
• Track Playback Meters. Displays playback meters.
• Bus Meters. Displays meters in buses.
For more information about metering options, see “Changing the meters’ display” on page 901.
To change a meter’s range
• Right-click on the meter and choose a new range.
To add a bus
1. Right-click in the Bus pane (to add a bus at the end of the current buses) or over an existing bus
(to add a bus before it).
2. Select Insert Stereo Bus or Insert Surround Bus from the menu that appears.
A bus appears in the Bus pane.
To delete a bus
1. Right-click in the Bus pane over an existing bus.
2. Select Delete Bus from the menu that appears.
The bus is deleted from the Bus pane.
To create a bus send in a track
1. Right-click in an empty part of the Track pane (Track view) or a track module (Console view).
2. Select Insert Send for a list of buses available.
3. Select a bus from the list.
To set the snap-to position of a knob or fader
1. Set the control to the desired position.
2. Right-click on the control and choose Value > Set Snap-To=Current.
From now on, the control returns to this position when double-clicked.
Note: If you have any track or bus routed through the bus you delete, the signal will be rerouted
to the deleted bus’s output.