Reference Guide

875
ReWire
Software instruments
MIDI - Devices, and then select that MIDI Input from whatever menu your ReWire application
has for that purpose. If you have multiple inputs on your MIDI interface, simply select different
ones for SONAR and your ReWire application.
ReWire and fast forwarding in SONAR
When there is a ReWire application loaded into a SONAR project, the SONAR Fast Forward button/
command only works if there is a clip at the end of the SONAR project or if Stop at Project End is
not checked.
ReWire tracks silent when using metronome record count-in
When using a metronome count-in and recording, any ReWire tracks will be silent at the start of
recording. The silence period will equal the count-in duration. To fix this issue, disable metronome
count-in (go to Edit > Preferences > Project - Metronome and set Record Count-in to 0).
See:
“ReWire instruments” on page 870
“Inserting a ReWire instrument” on page 871
“Routing MIDI data to ReWire instruments” on page 873
“Mixing down ReWire instruments” on page 874
“Automating ReWire instruments” on page 874