Reference Guide

844 Editing audio
Advanced audio processing
To apply a fade to audio data
1. Select the audio data to be affected.
2. Choose Process > Apply Effect > Fade/Envelope to open the Fade/Envelope dialog box.
3. Select an envelope from the drop-down list.
Figure 270. The Fade/Envelope dialog
4. If desired, manipulate the curve as described in the table above.
5. Click OK.
SONAR applies the fade to the selected audio data.
To crossfade two overlapping clips
1. Select two overlapping audio clips. They need not be on the same track, but they must overlap in
time for the command to have any effect.
2. Choose Process > Apply Effect > Crossfade to open the Crossfade dialog box.
3. Select an envelope from the drop-down list.