Reference Guide

799
MIDI effects (MIDI plug-ins)
Editing MIDI events and continuous controllers (CC)
To apply Echo/Delay to MIDI data
1. Select the data to be affected.
2. Right-click the selected clip(s) and choose Process Effect > MIDI Effects > Cakewalk FX >
Echo/Delay on the pop-up menu.
3. Set the echo/delay parameters, as described in the table above.
4. Click OK.
SONAR applies the specified echo effect to the selected data.
Delay The delay between successive echo notes.
Delay Units The units used to specify the delay. You may specify delay in ticks, in
milliseconds, or as a note duration.
Tap The delay you specify by tapping the control with the mouse.
Swing (%) The distortion of timing used to produce a swing feel to the echo. A value of 0%
indicates a straight rendition; negative and positive values produce distortion of
the timing grid. For more information about swing, see “Swing” on page 768.
Pitch (Steps) The number of steps to transpose each echo note from the previous. You can
specify a Diatonic or Chromatic scale.
Parameter/Option Meaning
Table 145.