Reference Guide

756 Editing MIDI events and continuous controllers (CC)
The Inline Piano Roll view
749.
You can zoom in to or out of individual MIDI Tracks by dragging the MIDI Scale up or down. See
“The MIDI scale” on page 754 for more information.
To edit controller events in the Inline Piano Roll view
1. Click the MIDI track’s Edit Filter control, point to Notes and choose New Value Type to open the
MIDI Event Type dialog box.
2. Choose options from the following fields:
• Type. Choose the type of controller you want to add (for example, choose Control if you
want to edit volume).
• Value. This field is grayed-out if you choose Wheel or ChanAft in the Type field. If you
choose Control, RPN, or NRPN in the Type field, choose which Control, RPN, or NRPN you
want to add. For example, to edit volume, choose 7-Volume in this field if you chose Control
in the Type field.
• Channel. Choose a MIDI channel for the controller if you want. If your track has a MIDI
channel listed in the Ch field, all MIDI data in your track uses the listed MIDI channel.
See also:
“Selecting notes” on page 732
“Adding and editing controllers in the Piano Roll” on page 743
“Adding and editing notes in the Piano Roll” on page 732
“Adding controllers” on page 747
“Selecting controllers” on page 749