Reference Guide

686 AudioSnap (Producer and Studio only)
General editing
7. Where the gaps were between clips, we now see crossfades. The default length of the crossfade
is 20 milliseconds, but you can change that by entering a number in the XFade <number goes
here> ms field in the dialog box.
8. If you don’t want wide gaps to be filled in, you can enter a number of up to 200 milliseconds in
the Max Gap field. Any gap that is wider than the number in this field will not be filled in.
If we wanted to drag the clips to new locations instead of quantizing them, we could fix any resulting
gaps by selecting the clips that have gaps, and use the Track view Clips > Fade Clips command.
The Fade Selected Clips dialog box has the Fill Gaps, XFade between Audio Clips radio button,
the XFade <number goes here> ms field, and the Max Gap field.
Figure 235. The Fade Selected Clips dialog
To fill in gaps with the Fade Selected Clips command
1. Select the clips that have gaps you want to fill.
2. Click the Track view Clips menu and choose Fade Clips to open the Fade Selected Clips
dialog box.
3. Enable the XFade between Audio Clips radio button, and set any options you want in the
XFade <number goes here> ms field, and Max Gap field.
4. Click OK.
See:
“Using global tools on AudioSnap transient markers” on page 638
“Editing transient markers” on page 643
“Using the AudioSnap palette” on page 652
“Synchronizing audio and the project tempo” on page 656
“Fixing timing problems in audio clips” on page 663
“Extracting MIDI timing information from audio” on page 679
“Using the Pool” on page 689
“Algorithms and rendering” on page 692