Reference Guide

592 Inspectors

Properties Inspector overview

The Properties Inspector shows properties for the selected clip(s) or track(s), depending on whether

the Clip or Track button is pressed:

• Clip. The Clip Properties Inspector displays settings for the currently selected clip(s). For

details, see “Properties Inspector - Clip Properties” on page 594.

• Track. The Track Properties Inspector lets you type a track name, specify the automation write

mode and time base, specify an audio track’s AudioSnap render modes, specify the default clip

colors, and enter a text description for the selected track(s). For details, see “Properties Inspector

- Track Properties” on page 600.

• Bus. The Bus Properties Inspector lets you type a bus name, specify the automation write mode

and time base, and enter a text description. For details, see “Properties Inspector - Bus

Properties” on page 603.

The Properties Inspector contains multiple sections that you can show/hide by clicking the section’s

header bar. By default, the Clip Properties Inspector and Track Properties Inspector are collapsed.

Only one section can be visible at a time.