Reference Guide

578 Inspectors
Track Inspector overview
To show a track/bus/main in the Track Inspector
Do one of the following:
• Click the desired track, bus or main in the Track view or Console view.
• Click the Track Name control in the Track Inspector to select any available track, bus or main.
To lock the Track Inspector to a specific track or bus
Be default, the Track Inspector dynamically updates to show the current track. However, you can
choose to always show a specific track or bus regardless of which track is current.
1. Click the track or bus you want to show in the Track Inspector.
2. Click the Track Name control in the Track Inspector and select Lock the current track or bus
from the drop-down menu.
To unlock the track or bus, select Lock the current track or bus from the menu again.
See:
“Track Inspector controls” on page 579:
“Audio track controls” on page 583
“Bus controls” on page 584
“MIDI track and Instrument track controls” on page 585
“Main controls” on page 590
“Properties Inspector overview” on page 592
Note: When the current track is an Instrument track, you can show either audio output controls
or advanced MIDI settings in the right strip by selecting the Audio tab or MIDI tab at the bottom
of the Track Inspector.