Reference Guide

553

Control Bar overview

• Live Input PDC Override . Enable/disable delay compensation on live tracks, thereby

removing the latency during playback and recording of such tracks. Because it's a toggle, you can

quickly turn it on to complete your tracking at low latency, and turn it off when finished to hear the

track compensated as normal. For details, see “Live Input PDC override” on page 300.

• Allow Automation Writing . Globally enable/disable the ability to write automation.

• Global Automation Playback . Globally enable/disable all automation playback.

• Offset mode . Enable/disable Offset mode. In Offset mode, you “offset” the current

automation in a track using a parameter’s controls. For details, see “Envelope mode and Offset

mode” on page 1131.

See:

“Silencing tracks” on page 203

“To mute or solo a bus” on page 893

“Muting and soloing soft synth tracks” on page 863

“Soloing tracks” on page 204

“Dim Solo mode” on page 205

“Exclusive Solo mode” on page 206

“Arming tracks for recording” on page 281

“Input monitoring” on page 296

“To globally bypass all effects in a project” on page 920

“To globally bypass all track, bus or clip effects” on page 921

“Live Input PDC override” on page 300

“Automation Read and Automation Write buttons” on page 1108

“Recording individual fader or knob movements” on page 1109

“Creating and editing automation envelopes” on page 1119

“Automating individual effects parameters” on page 1136

“Recording automation data from an external controller” on page 1138