Reference Guide

455

Tools

• “Using the Line tool on automation” on page 491

• “Using the Pattern tools on automation” on page 493

• “Using the Erase tool on automation” on page 497

• “To select automation” on page 529

• “To move automation” on page 529

• “To draw automation freehand” on page 530

• “To draw a straight line” on page 530

• “To draw automation shapes” on page 531

• “To erase automation” on page 532

• “To add envelope nodes” on page 532

• “To draw MIDI continuous controller envelopes” on page 533

Editing AudioSnap transients

• “Working with AudioSnap transients” on page 534

• “Using the Smart tool on AudioSnap transients” on page 463

• “Using the Select tool on AudioSnap transients” on page 468

• “Using the Move tool on AudioSnap transients” on page 472

• “Using the Timing tool on AudioSnap transients” on page 479

• “Using the Freehand tool on AudioSnap transients” on page 488

• “Using the Erase tool on AudioSnap transients” on page 498

• “Using the Mute tool on AudioSnap transients” on page 502

• “To split an audio clip at transient markers” on page 535

• “To select transient markers” on page 534

• “To move transient markers (without stretching audio)” on page 534

• “To stretch transients” on page 534

• “To promote transient markers” on page 535

• “To erase transient markers” on page 535

• “To add transient” on page 535

See:

“Smart tool” on page 456

“Select tool” on page 464

“Move tool” on page 469