Reference Guide

436 Arranging and editing
Enhanced editing with keyboard
See:
“Navigating with a keyboard” on page 436
“Selecting with a keyboard” on page 438
“Editing with a keyboard” on page 439
Navigating with a keyboard
Scroll and Zoom are part of the same mode, which makes it fast to navigate around a project.
You can zoom both horizontally and vertically, in small or large steps.
You can scroll fast or slow in any direction, in small or large steps.
To zoom and scroll with a keyboard
1. On your QWERTY keyboard, press the NumLock key to enable NumLock mode.
2. On the numeric keypad, press 0 to enable keyboard editing.
3. On the numeric keypad, press 1 to enable Zoom/Scroll mode.
The numeric keypad is mapped as follows:
Volume knob (if
keyboard has a rotary
encoder)
Zoom/scroll/trim/crop depending on current mode
PLUS (+) Crop or fade right in Edit mode
MINUS (-) Crop or fade left in Edit mode
Key Function CTRL+ ALT+ SHIFT+
0 Enable/disable keyboard
editing (when NumLock is
enabled)
-- -- --
1 Enable Zoom/Scroll mode -- -- --
2 Scroll down in large steps Zoom out
vertically in large
steps (based on
selection)
-- --
3 Enable Select mode -- -- --
Table 64.
Key Function
Table 63.