Reference Guide

420 Arranging and editing
Changing tempos
Figure 113. The Tempo dialog
3. Check the Insert a New Tempo box.
4. Enter a new tempo in one of the following ways:
• Type a value in the Tempo field.
• Click the arrows to change the value.
• Tap a new tempo in the space indicated in the dialog box.
5. Enter a starting time for the new tempo.
6. Click OK.
SONAR inserts a tempo change at the designated time.
To insert a series of tempos
1. Enable Groove Clip Looping on any audio clips that you want to follow the tempo changes. Do
this by selecting one or more clips, right-clicking a selected clip, and choosing Groove > Clip
Looping from the pop-up menu. Each clip that has Groove Clip Looping enabled has beveled
edges instead of sharp corners. The same command disables Groove Clip Looping on any
selected clip that has Groove clip Looping enabled.
2. Choose Project > Insert Series of Tempos to display the Insert Series of Tempos dialog box.
Figure 114. The Insert Series of Tempos dialog
3. Enter a starting tempo, ending tempo, and step size.
4. Enter a starting and ending time for the series of tempo changes.
5. Click OK.