Reference Guide

356 Arranging and editing
Arranging clips
To copy clips using drag and drop
1. Select the clips you want to copy.
2. Enable the snap grid, if desired.
3. Select the Smart tool in the Control Bar.
4. Position the mouse over one of the selected clips.
5. Press and hold the CTRL key and click and hold the left mouse button. A rectangle is displayed
around the selected clips.
6. Drag the clips to the new location, and release the mouse button.
7. If necessary, choose the options you want from the Drag and Drop Options dialog box, and
click OK.
SONAR copies the clips to their new location.
To copy clips using copy and paste
1. Select the clips you want to copy.
2. Choose Edit > Copy Special to display the Copy dialog box.
3. Choose the options you want and click OK. SONAR copies the clips to the Clipboard.
4. Click in the Track pane to set the current track to be the one where clips should be pasted.
5. Set the Now time to be the time the clips should be pasted.
6. Choose Edit > Paste Special to display the Paste dialog box.
7. Choose the options you want and click OK.
SONAR copies the clips to their new location.
To delete clips
1. Select the clips you want to delete.
2. Do one of the following:
• Choose Edit > Delete, which brings up a dialog box—choose options and click OK.
• Press the DELETE key.
SONAR deletes the selected clips.
See:
“Splitting and combining clips” on page 379
“Working with partial clips” on page 368
“Working with linked clips” on page 377
“Aim Assist line” on page 357