Reference Guide

319
Importing music and sound
Recording
• Sound Designer II (extension .sd2)
• Core Audio Format (extension .caf)
The sampling rate and bit depth for a project is set based on your default settings in Edit >
Preferences > Audio - Driver Settings. If the sampling rate from the Wave file does not match the
sampling rate in your project, then it will be converted to the current project’s sampling rate and bit
depth.
To import an audio file
1. Set the Now time and current track to indicate where the audio should be placed.
2. Choose File > Import > Audio to display the Open dialog box.
3. Choose the audio file you want to import. SONAR displays information about the file at the
bottom of the dialog box.
4. Click Play to listen to the audio file before importing.
5. If the new file is stereo, check the Stereo Split option if you want to insert the file into two
separate tracks.
6. Click Open.
SONAR loads the audio data from the audio file and places it in the selected track at the Now time.
Preview bus
Files in the Import Audio dialog box may be selected and previewed in any existing bus in SONAR.
To preview a file
1. Select the desired output bus in the Preview Bus combo box.
2. Click on the file in the file explorer pane.
3. Click the Play button.
4. During playback, the Play button becomes a Stop button. Click Stop to stop playback.