Reference Guide

304 Recording
Loop recording
Figure 79. The Record section
4. Choose to stack all takes in a single track or to store them in separate tracks.
5. If you choose to stack all takes in a single track, choose either Comping, Sound on Sound or
Overwrite mode.
If you use single track and Comping or Sound on Sound with Track Lanes enabled, selecting the
Create New Lanes on Overlap check box will create another Take lane if your new clip overlaps
an existing clip.
6. If you stack all takes in a single track, you can audition them later by using the Expand/collapse
Take Lanes button in the bottom left corner of the Track pane (each take will have its own
Mute and Solo buttons).
7. Click OK to close the Preferences dialog box, and set the Now time to the point in the project
where you want to start recording.
8. Click or press R. If your metronome count-in is turned on, it will play the count-in measure.