Reference Guide

2024 View reference
Matrix view
You can right-click a cell to access the following commands:
• Import File. Use this command to import a file into a cell.
• Rename Cell. Use this command if you want to rename the cell.
• Clear Cell. Use this command to remove any pattern and MIDI assignment from the cell.
• One-Shot Trigger. Use this command to configure a cell as a one-shot sample. A one-shot cell
plays one repetition from beginning to end and ignores any loop and latch settings.
• MIDI Learn. Use this command to assign a MIDI event to a cell, which allows you to trigger the
cell via MIDI remote control. The MIDI Learn command shows an orange outline around the cell if
it is already in MIDI Learn mode, and shows a small MIDI icon if there is already a MIDI event
assigned to the cell. You can use the MIDI Learn command on both active and empty cells.
• Clear MIDI Learn. Use this command to remove any MIDI assignment from the cell. The cell
will no longer be triggered via MIDI remote control.
• Trigger Resolution. Assign the desired trigger resolution to the cell. A cell can either follow the
default Global Trigger Resolution setting, or a per-cell trigger resolution. The following settings
are available:
• Follow Global (default)
• Immediate
• Measure
• Beat
•1/4
•1/8
•1/16
•1/32
•1/64
In addition to a mouse, you can use the computer keyboard to navigate between cells:
• Use the ARROW keys to move focus to another cell that contains data.
• Press ENTER to trigger the cell that has focus.
• Press DELETE to clear the cell that has focus.
See:
“To assign a pattern to a cell” on page 2026
“To assign multiple patterns to subsequent columns” on page 2027
“To remove a pattern from a cell” on page 2027
“To specify how soon a pattern should start playing after being triggered” on page 2028
“To start a pattern from its beginning” on page 2028
“To synchronize a pattern with the project’s Now time” on page 2028