Reference Guide

1913

Loop Properties dialog—Audio Files

The Audio Files tab of the Clip Properties dialog box lists:

• The audio file(s) that make up the selected clip

• The pathname(s) the files are stored under

• The bit depth of the clip

Recompute Picture(s)

Click Recompute Picture(s) to redraw waveforms for individual clips that may have a corrupt

waveform display.

Control Properties dialog

The Control Properties dialog box appears when you right-click an assignable knob or button in an

FX Chain property page and select Edit control on the pop-up menu. This dialog box lets you

configure assignable knobs and buttons.

The Control Properties dialog box contains the following settings:

• Name. The name of the assignable control, shown as the label

• Position. The “slot” position of the control, from left to right.

• Destination. Choose up to four automatable plug-in parameters to control with the assignable

knob or button.

• Start. The start value for the destination parameter, specified as a percentage (0.00% to

100.00%).

• End. The end value for the destination parameter, specified as a percentage (0.00% to

100.00%). You can also set Start and End values automatically. For details, see “To set parameter

value range automatically” on page 940.

See:

“To customize an assignable control” on page 939