Reference Guide

1885

Set Timecode at Now Time

The Project > Set Timecode at Now command opens the Set Timecode at Now Time dialog box,

which allows you to move the SMPTE time 00:00:00:00 to the current Now time. If you enter a value

in the dialog box, the SMPTE value that you enter is set to the current Now time.

Slide dialog

The Process > Slide command opens the Slide dialog box, which allows you to move track data

forward or backward in the track.

The Slide dialog box has the following fields:

Slide

Choose what kinds of track data you want to move:

• Events in Tracks. Events include notes and controller data but not markers.

• Markers. If you select any locked markers, SONAR asks whether you want to slide them

too.

Enter a number in the By field to control how many units your selected data moves. Negative

numbers move the data to earlier positions in the track, but data can not move earlier than beat 1 of

the first measure. Choose from the following units:

• Measures. If you choose Measures, the selected data moves by a number of whole

measures.

• Ticks. If you choose Ticks, the selected data moves by a number of ticks, which are portions

of a beat.

• Seconds. If you choose Seconds, the selected data moves by a number of whole seconds.

• Frames. If you choose Frames, the selected data moves by a number of frames, which are

the smallest units of SMPTE time.