Reference Guide

1740 Dialog box reference
Freeze Options dialog
Freeze Options dialog
The Freeze Options dialog box has the following options:
Fast Bounce
When checked, SONAR bounces to tracks as fast as your computer will allow. If unchecked,
bouncing to tracks happens in real time. Uncheck this option if you are using a synth that only works
in real time. This option is checked by default.
Hide MIDI Tracks
Check this box if you want the MIDI tracks associated with your synth to be hidden when the synth is
frozen.
Single Bounce Per Track
Check this if you want to create a single clip for all the bounced audio. If you don’t check this, each
separate clip on a track creates a separate clip when you freeze the track.
Remove Silence
If you checked the previous option, you can check this box and adjust settings in the Remove
Silence dialog box to remove silence in a frozen track. Checking this option will create separate
clips from a single clip that has areas of silence in it.
Freeze Tail Duration n seconds
This value allows for a reverb or delay tail (the reverberations or signal delay that continue once the
source has stopped). Set this value at a high enough value to allow for any delay or reverb or other
effect that you may have patched into a track.
Audible bounce
When Fast bounce is disabled, the real-time bounce operation can be performed either silently or
audibly. To hear the bounce operation while freezing a track, select the Audible bounce check box.
Track FX
When selected (default behavior), the track effects bin is rendered into the frozen clip, Freeze Tail
Duration is applied, and the track effects bin is bypassed.
If the Track FX option is not selected, the track effects bin is not rendered into the frozen clip, which
is useful when freezing AudioSnap clips in order to conserve CPU resources.
Tip: You can right-click any track’s Freeze button in the Track view to open the Freeze Options
dialog box.