Reference Guide

1702 Dialog box reference
Bank Name dialog
Bank Name dialog
When you select a bank in the Sysx view and click the Name button, the Bank Name dialog box
appears. This dialog box lets you specify the name of the bank you selected. A bank must contain
some Sysx data before you can name it.
See also:
“Using the System Exclusive view” on page 1253
Bank Output dialog
When you select a bank in the Sysx view and click the Output button, the Bank Output dialog box
appears. This dialog box lets you specify which MIDI output you want the bank transmitted to. This is
useful when you have MIDI playback modules connected to several different ports of your MIDI
interface and you want to control which module receives a particular Sysx message.
See also:
“Using the System Exclusive view” on page 1253
Bank/Patch Change dialog
Select Insert > Bank/Patch Change to open the Bank Patch Change dialog box.
The output and channel of the selected track appear in the upper left corner.
Bank Select Method:
Choose from one of the following MIDI standard protocols:
• Normal
• Controller 0
• Controller 32
• Patch 100...127
For more information see “Assigning the Bank Select method” on page 1240.
Bank:
Select the Bank you want to use.
Patch:
Select the Patch you want to use.
If you want to use the “Patch Browser dialog” on page 1773, click the Patch Browser icon.