Reference Guide

1626
[Track view] Options > Meter Options > Track Meter Options > Peak + RMS
[Track view] Options > Meter Options > Track Meter
Options > Peak + RMS
This command sets the meter to Peak + RMS.
For more information about Peak + RMS meter display, see “Metering” on page 899.
[Track view] Options > Meter Options > Track Meter
Options > Pre Fader
This command sets the meter to measure the volume level in the signal path prior to entering the
fader.
[Track view] Options > Meter Options > Track Meter
Options > Post Fader
This command sets the meter to measure the volume level in the signal path after exiting the fader.
[Track view] Options > Meter Options > Track Meter
Options > -12 dB
This command changes the range that track playback meters measure to 12 dB.
For more information about meters, see “Metering” on page 899.
[Track view] Options > Meter Options > Track Meter
Options > -24 dB
This command changes the range that track playback meters measure to 24 dB.
For more information about meters, see “Metering” on page 899.