Reference Guide

1607

Output Bus Meter Options > Lock Peaks

Menu reference

Output Bus Meter Options > Lock Peaks

This command when checked and the Hold Peaks is also checked causes the peak to be locked at

its highest point on the meter until the end of playback or recording.

Playback Meter Options > Pre Fader

This command sets the meter to measure the volume level in the signal path prior to entering the

fader.

Output Bus Meter Options > Pre Fader

This command sets the meter to measure the volume level in the signal path prior to entering the

fader.

Playback Meter Options > Post Fader

This command sets the meter to measure the volume level in the signal path after exiting the fader.

Output Bus Meter Options > Post Fader

This command sets the meter to measure the volume level in the signal path after exiting the fader.

Output Bus Meter Options > Pre Fader Post FX

This command sets the meter to measure the volume level in the signal path after the effects bin and

prior to the fader.

Percentage

This command sets the Audio Scaling ruler to display the percentage of the waveform being shown.