Reference Guide

145
Tutorial 6 – Editing your music
Method 1:
1. Select the track that you want to delete measure 1 through measure 6 from. For this tutorial, let’s
use the track named GTR_Lead 1.
2. Drag in the time ruler from measure 1 through measure 6.
The selected time range is highlighted.
3. Press DELETE or select Edit > Delete.
Measures 1 through 6 are deleted from the selected track.
Method 2:
1. Select the Select tool in the Control Bar.
2. Click in the center of the clip and drag to select the section you want to delete.
The selected section is highlighted.
3. Press DELETE or select Edit > Delete.
You might have noticed that you're only able to select full measures. What if you need to edit a
smaller amount of time? You'll need to turn off Snap To Grid. To do so, click the Snap to Grid
button in the Control Bar’s Snap module. With this button disabled, you will be able to make
finer selections. You can also choose different Snap To Grid options in the Snap module.
See:
“Moving clips” on page 146
“Splitting clips” on page 146
“Cropping clips” on page 147
“Undo and Redo” on page 143
Tip: Click in the Tracks pane on the left, not the Clips pane on the right.