Reference Guide

1328 External devices

Setting up control surfaces

Synchronizing channel strips between SONAR and control surfaces

SONAR allows control surfaces to display all channel strips in a project, or only the channel strips

that are visible in the Track view or Console view.

1. Go to Edit > Preferences > MIDI - Control Surfaces.

2. Under Control Strips Visible in, click one of the following:

• Track View. The controller/surface matches the channel strips that are visible in the Track

view.

• Console View. The controller/surface matches the channel strips that are visible in the

Console view.

• All Strips. The controller/surface shows all channel strips in the project.

The controller/surface immediately refreshes and displays the specified channel strips.

Figure 386. The Control Surfaces section.