Reference Guide

1269
Choosing clock sources: SONAR as master
Synchronizing your gear
To use the Internal clock source
Do one of the following:
•Go to Edit > Preferences > Project - Clock and select Internal.
• In the Control Bar’s Sync module, click the Sync Type button and choose Internal Sync on the
pop-up menu.
Figure 379. The Sync module.
A. SMPTE/MTC format B. Incoming timecode C. Sync type
To use the Audio clock source
Do one of the following:
•Go to Edit > Preferences > Project - Clock and select Audio.
• In the Control Bar’s Sync module, click the Sync Type button and choose Audio Sync on the
pop-up menu.