Reference Guide

1056 Using Region FX
Melodyne (Producer and Studio only)
To correct pitch automatically by macro
1. Select the region or clip you want to edit.
2. Convert the selection to a Melodyne Region FX clip. For details, see “To create a Melodyne
Region FX clip” on page 1050.
3. In Melodyne, select the notes you wish to edit. If no notes are selected, all notes will be edited.
4. Click the Correct Pitch button to open the macro controls.
5. Adjust the Correct Pitch Center slider to apply a degree of correction ranging from 0% (no
correction) and 100% to the pitch center of the selected note(s).
6. Adjust the Correct Pitch Drift slider to progressively reduce the amount of pitch drift exhibited
by the selected note(s).
7. Click OK when you are satisfied with the results.
After using the Correct Pitch macro, you can fine-tune notes further with the Main tool , if desired.
For details about using the Melodyne editor, consult the Melodyne Help menu.
Note: By default, notes are moved towards the nearest semitone. To snap to the detected scale,
select the Snap to <name of scale> check box. When enabled, any notes outside of the scale
are ignored.
Note: When adjusting notes with the macro controls, Melodyne will ignore any notes you have
manually edited with the Main tool . If you also wish to edit these notes, select the Include
notes already edited manually check box.