Reference Guide

1006 ProChannel (Producer and Studio only)
To use presets
Do one of the following:
• To load an existing preset, click the Load Preset button and navigate to the desired preset
file.
• To save a new preset or overwrite the current preset, click the Save Preset button , type a
name, then click Save.
Figure 311. Use presets to save and recall favorite settings.
A. Current preset B. Load Preset C. Save Preset
To lock ProChannel in the Inspector pane
By default, the Track Inspector dynamically updates to show the current track. However, you can
choose to always show a specific instance of ProChannel regardless of which track is current.
1. Click the track or bus you want to show in the Track Inspector.
2. Click the ProCh button at the top of the Inspector.
ProChannel is displayed in the Inspector pane.
3. Click the Track Name control at the bottom of the Inspector and select Lock the current track
or bus from the drop-down menu.
To unlock the track or bus, select Lock the current track or bus from the menu again.
Keyboard navigation
When ProChannel has focus, you can use the following keys to navigate around ProChannel:
Note: To see the Load Preset and Save Preset buttons in the Inspector and collapsed Console
view strips, hover the mouse over the Preset control.
Key Action
PAGE UP Scroll up
PAGE DOWN Scroll down
HOME Go to top
END Go to bottom
Table 177. ProChannel keyboard shortcuts
A B C