Reference Guide

985
ProChannel (Producer only)
To adjust parameters with finer precision, hold down the SHIFT key while dragging.
To enable/disable a band, click the band’s region in the graph.
To change the plot resolution globally, right-click any small QuadCurve Equalizer graph in the
Console view and choose the desired resolution on the pop-up menu. The resolutions are as
follows:
Auto (graph scales dynamically)
•6 dB
12 dB
18 dB
Band enable/disable. Enables/disables the Low , Low-Mid , Mid-High and High
bands. Enabling a band allows it to be processed with equalization. The knobs and graph
curves are color-coded per band:
Low = Red
Low-Mid = Yellow
Mid-High = Green
High = Blue
Frequency. Sets the center frequency for the selected band (Low, Low-Mid, Mid-High and
High). The valid frequency range for each band is as follows:
Q. Sets the width of the selected band (Low, Low-Mid, Mid-High and High), which determines
the amount of surrounding frequencies that will be affected when adjusting the band. A low Q
value gives a high bandwidth for the filter band, resulting in a smooth shaping of the sound and
little audible 'coloration'. Filtering will however be less accurate, since a wide frequency range
around the center frequency will be affected. A high Q value reduces the bandwidth, improving
filter accuracy but also creating sharp dips or peaks in the frequency spectrum. The width of the Q
is expressed in terms of octaves. The valid range is 0.1 to 16.0 and the default value is 1.3.
Level. Boosts or attenuates the selected band (Low, Low-Mid, Mid-High and High).The valid
range is -18.0 dB to +18.0 dB and the default value is 0 dB. The Level control interacts with the Q
parameter, depending in the selected EQ type (Hybrid, Pure, E-Type or G-Type).
Low band filter type. Toggles the Low band between Bell and Low Shelf mode. In Bell mode,
Band Frequency range Default center frequency
Low 20.0 - 20000.0 Hz 79.6 Hz
Low-Mid 20.0 - 20000.0 Hz 317 Hz
Mid-High 20.0 - 20000.0 Hz 1261.9 Hz
High 20.0 - 20000.0 Hz 5023.8 Hz
Table 178. Default center frequency for each band