Reference Guide

640 AudioSnap (Producer and Studio only)

General editing

6. The start of each clip now lines up where we want it to, but there are gaps between some of the

clips. Let’s undo what we just did (press CTRL+Z), and quantize again. This time, however we

will enable the Auto XFade Audio Clips option in the Quantize dialog box, and click OK:

A. Crossfades

7. Where the gaps were between clips, we now see crossfades. The default length of the crossfade

is 20 milliseconds, but you can change that by entering a number in the XFade <number goes

here> ms field in the dialog box.

8. If you don’t want wide gaps to be filled in, you can enter a number of up to 200 milliseconds in

the Max Gap field. Any gap that is wider than the number in this field will not be filled in.

If we wanted to drag the clips to new locations instead of quantizing them, we could fix any resulting

gaps by selecting the clips that have gaps, and use the Track view Clips > Fade Clips command.

The Fade Selected Clips dialog box has the Fill Gaps, XFade between Audio Clips radio button,

the XFade <number goes here> ms field, and the Max Gap field.